1 wire
circuits 
related topic: RS232-485 |
|
1-Wire 8-bit LCD
Reference Design This application note describes how a DS2408 1-Wire
8-Channel Addressable Switch can be used to display characters on an LCD. The
code is written using the 1-Wire API for Java. A diagram shows how to hook the
DS2408 to any LCD using a Hitachi-44780-based LCD controller chip |
| 1-wire barometer
barometer, project to build a 1-wire barometer based on the MPX4115A |
|
1-wire barometer
This article describes details for constructing a 1-Wire Barometer which will
work on a Dallas Semiconductor Corporation 1-Wire network, MPX4115 |
|
1-Wire Barometer barometer sensor circuit, pdf file |
|
1-wire barometer
This article describes details for constructing a 1-Wire Barometer which will
work on a Dallas Semiconductor Corporation 1-Wire network circuit |
|
1 Wire Barometer |
|
1-wire application
notes |
|
1-Wire Basics |
|
1-Wire Humidity Sensor
A humidity sensor designed for retrofit into a 1-Wire weather station is powered
by and communicates over a single twisted pair, pdf file |
|
1-Wire
introduction 1-wire is defined as a single-wire (plus ground) communications
protocol. It was developed by Dallas Semiconductors to provide a convenient way
of adding sensors to a single bus complete with integrated power source |
|
1-Wire LCD controller
The 1-Wire LCD controller connects to a Dallas 1-Wire network and functions as a
slave device. This controller could be used to display information on a LCD
under control of a 1-Wire network master |
|
1-wire lightning monitor |
|
1-wire
technology and its use this article presents an overview of 1-WireŽ
technology and describes, in particular, its networking and measurement/sensing
abilities, including measuring events, voltages, current, temperature, position,
etc |
|
1-Wire
Thermocouple |
|
1-wire
technology and its use pdf file |
|
1-Wire Thermocouple
circuit 1-Wire Thermocouple circuit, This article describes a 1-WireŽ
thermocouple. It covers a method of measuring temperatures using conventional
thermocouples that are directly digitized at the cold junction. The transducer
is based on a multifunction 1-Wire chip that communicates with a PC (or
microcontroller) master over a single twisted-pair line. A significant advantage
of the transducer is that each has a unique 64-bit address that permits positive
identification and selection by the bus master, and thus, multiple sensors may
share the same 1-Wire network circuit, schematics |
|
1-Wire
Weather Station |
|
1-wire weather station pdf file |
|
1-wire weather station
This article presents a 1-WireŽ weather station that solves many of these
problems by transmitting both power and bi-directional data over a single
twisted-wire cable |
|
DS18S20 temperature
sensor DS18S20 High-Precision 1-Wire Digital Thermometer, pdf file |
|
How to Use a PC's
Parallel Port to Communicate with 2-Wire Devices |
|
One
wire bus powers water level sensor remotely monitor the level of liquid water in a vessel such as a swimming pool |
|
Opto
isolated 1-Wire bus |
|
Parasitic power on the 1 wire bus
Single-Wire Serial Bus Carries Isolated Power and Data,An interface circuit uses
the Dallas Semiconductor 1-Wire serial bus to provide isolated power and
bidirectional communications between a master (MCU) and a sensing element,
pdf file |
|
Single-Wire,
Digital-Output Temperature Sensors |
|
Supplying Power via the
1-Wire Bus pdf file |
|
Tools for 1-Wire
Software Developers |
| Remote Monitoring
System Sends E-mail via SMS This application note demonstrates how to make a
simple system that monitors temperature and analog voltages remotely. On meeting
certain alarm conditions, the system can send SMS messages, which are then
converted to E-mail and forwarded to the designated E-mail address |
|
Horizontaal |
|
|
Home
|
Site Map
|
Email: support[at]karadimov.info
Last updated on:
2011-01-02
|
Copyright © 2011-2021 Educypedia.
http://educypedia.karadimov.info
|
| |
